|
Product Details:
|
| Product Name: | Anionic Polyacrylamide Flocculant High Molecular Weight PAM For Industrial Wastewater Treatment | Product Grade: | Industrial Grade |
|---|---|---|---|
| Product Type: | Anionic | Degree Of Hydrolysis: | 25-30% |
| Molecular Weight: | 6-18 Million | Application Field: | Industrial Wastewater Treatment |
| Package: | 25kg/bag | Storage: | Ventilated And Dry Storage |
| Customized Service: | Product Packaging Can Be Customized | Samples: | Free Samples |
| High Light: | Anionic PAM Powder,High Molecular Weight Anionic PAM,PAM Powder Wastewater Treatment |
||
Anionic Polyacrylamide Flocculant High Molecular Weight PAM For Industrial Wastewater Treatment
Anionic polyacrylamide (APAM) Anionic polyacrylamide is a water-soluble polymer. Because its molecular chain contains a certain number of polar groups, it can absorb solid particles suspended in water, bridge between particles or make particles agglomerate to form large flocs through charge neutralization. Therefore, it can accelerate the sedimentation of particles in the suspension, and has a very obvious effect on accelerating the clarification of the solution and promoting the filtration. It is mainly used for flocculation, precipitation and clarification of various industrial wastewaters such as iron and steel plant wastewater, electroplating plant wastewater, metallurgical wastewater, coal washing wastewater, and sludge dehydration. It can also be used for clarification and purification of drinking water.
| Product name | Polyacrylamide | ||||||
| Ion type | Cationic | Anionic | |||||
| Package | 25kg/bag | ||||||
| effect | Precipitation, clarification | ||||||
| Apperaance | White granular powder | ||||||
| Solid content | ≥90% | ||||||
| Molecular weight (million) | 8-12 | 6-18 | |||||
| Hydrolysis degree % | / | 5-30 | |||||
| Ionization degree % | 5-60% | / | |||||
| Suggested dissolution time | 60-90 Min | ||||||
Polyacrylamide product features
1. It has good water solubility and can be completely dissolved in cold water.
2. Add a small amount of this anionic polyacrylamide product to get a good flocculation effect. Generally, only 0.01~10ppm (0.01~10g/m3) needs to be added to give full play to its effect.
3. Anionic polyacrylamide products and inorganic flocculants (polyferric sulfate, polyaluminum chloride, iron salt, etc.) are used at the same time, and the effect is better.
Contact Person: Admin
Tel: +8613598853789
