Nonionic PAM Chemical Water Treatment Powder Cationic Polyacrylamide 207-173-7

Our company mainly produces Polyacrylamide. It is divided into Nonionic Polyacrylamide, Anionic Polyacrylamide and Cationic Polyacrylamide. They are white granule. And they are usually used for all kinds of waste water treatment. And some Polyacrylamide has molecular weight of up to two million. The quality is better than others. So if you need, please feel free to contact me.

1. Polyacrylamide can't be put directlr into sewage, so dissolve in water before using Polyacrylamide.
2. The dissolved water should be clean water, and without heating, but the temperature can't be cold. The temperature is higher
than five degress Celsius. Otherwise it will be dissolve very slowly. Temperature above 40 degrees Celsius affect the use effect.
3. Notice: Don't use strong acid, strong base, high salt water preparation.
4. The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents.
5. If because of other reasons, the dispersion is not good, we suggest that you mix a little more sparse.
6. The water is warmer in Summer. Cationic, Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide
should be strict for about 2 hours.
7. The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic
Polyacrylamide should be strict for about 3 hours.