|
Product Details:
|
| Other Names: | PAM, APAM, CPAM, NPAM | Chemical Formula: | (C3H5NO)n |
|---|---|---|---|
| EINECS No.: | 207-173-7 | Purity: | 99% |
| Appearance: | White Granule Powder | Product Name: | CPAM Cationic Polyacrylamide Granules Water Treatment Chemicals |
| Solid Content: | ≥ 90% | Shelf Life: | 1 Years Proper Storage |
| High Light: | CPAM Cationic Polyacrylamide Granules,Water Treatment CPAM Granules,207-173-7 CPAM Granules |
||
CPAM Cationic Polyacrylamide Granules Water Treatment Chemicals
Polyacrylamide is a kind of linear organic polymer, but also a kind of polymer flocculant product for water treatment. It can absorb suspended particles in water, bridge the connection between particles, and make the fine particles form relatively large flocs, and accelerate the precipitation speed. This process is called flocculation. Due to its good flocculation effect, PAM is widely used in sewage treatment.
| Product name | Cationic Polyacrylamide | |||||
| CAS No. | 9003-05-8 | |||||
| Apperaance | White granular powder | |||||
| Product model | C8016 | C8026 | C8036 | C8046 | C8056 | C8066 |
| Molecular weight (million) | 6-12 | 6-12 | 6-12 | 6-12 | 6-12 | 6-12 |
| Ionization degree % | approx 10 | approx 20 | approx 30 | approx 40 | approx 50 | approx 60 |
| Application field | Coating Auxiliary Agents,Electronics Chemicals,Leather Auxiliary Agents,Paper Chemicals,Petroleum Additives,Plastic Auxiliary Agents,Rubber Auxiliary Agents,Surfactants,Textile Auxiliary Agents,Water Treatment Chemicals | |||||
How to apply:
1. Dissolution: Dissolve solid PAM into an aqueous solution of 1‰-5‰ before use. Dosing should be added slowly to the water to ensure
chemicals can dissolve.
2. The dosage of the solution: the general aqueous solution is 1‰-5‰, but it is recommended to use a high-concentration and high-viscosity suspension. It is better to dilute the aqueous solution to 0.1‰ (try to avoid using a high shear centrifugal pump to dissolve the solution to
prevent the molecular chain from being cut)
3. The molecular weight of cationic PAM is lower compared to anionic PAM, therefore, the molecular weight of cationic and nonionic PAM is higher. The concentration ratio is higher than that of anionic PAM. The recommended concentration is 1‰-5‰.
Application areas:
PAM has a wide range of applications in water treatment, petroleum exploration, textile, papermaking, mineral processing, medicine, agriculture and other industries.
Contact Person: Admin
Tel: +8613598853789
