CPAM Cationic Polyacrylamide Granules Industrial Water Purifying Agent

1. Polyacrylamide cannot be directly put into sewage. Please dissolve PAM in water before using it.
2. The dissolved water should be clear water, without heating, but not too cold. high temperature
over five degrees Celsius. Otherwise it will dissolve very slowly. Temperature over 40 degrees Celsius will affect the use effect.
3. Note: Do not use strong acid, strong alkali or high salt water when preparing.
4. The recommended percentage range is between 0.1% and 0.3%. For example, 1 liter of water is matched with 1~3g of potion.
5. If the dispersion is not good for other reasons, it is recommended that you dilute it a little.
6. The water is warmer in summer. Cationic, anionic polyacrylamide should be strictly about 1 hour. Nonionic Polyacrylamide
Strictly speaking, it should be about 2 hours.
7. When the water is cold in winter, the yin and yang PAM should be strictly controlled for about an hour and a half. Nonionic
Polyacrylamide should be kept strictly for about 3 hours.