Product Details:
|
Keyword: | Polyacrylamide, PAM, NPAM | Chemical Formula: | (C3H5NO)n |
---|---|---|---|
EINECS No.: | 207-173-7 | CAS No.: | 9003-05-8 |
Certification: | ISO9001 | Application: | Sludge Dewatering |
Package: | 25kg/bag | Sample: | Free Sample Provided |
High Light: | Nonionic Polyacrylamide PAM Powder,PAM Powder For Sludge Dewatering,PAM Chemical Additives |
Nonionic Polyacrylamide Waste Water Treatment Chemical Additives
Polyacrylamide, abbreviated as PAM, is a linear polymer which is one of the most widely used varieties of water-soluble polymer compounds. Polyacrylamide and its derivatives can be used as effective flocculants, thickeners, paper enhancers and liquid drag reducers, etc., widely used in water treatment, paper making, petroleum, coal, mining and metallurgy, geology, textile Industrial sectors such as construction. Insoluble in most mailing solvents, it has good flocculation and can reduce the frictional resistance between liquids.
Product name | Cationic Polyacrylamide(CPAM) | ||
Applicable fields | Sludge Dewatering, Wastewater Treatment | ||
Apperaance | White granules powder | ||
Ionization degree | 5-65% | ||
Molecular weight | 6-12 million | ||
Dissolution time | 90 min |
Usage of Polyacrylamide:
1. Polyacrylamide can't be put directlr into sewage, so dissolve in water before using Polyacrylamide.
2. The dissolved water should be clean water, and without heating, but the temperature can't be cold. The temperature is higher than five degress Celsius. Otherwise it will be dissolve very slowly.Temperature above 40 degrees Celsius affect the use effect.
3. Notice: Don't use strong acid, strong base, high salt water preparation.
4. The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents.
5. If because of other reasons, the dispersion is not good, we suggest that you mix a little more sparse.
6. The water is warmer in Summer. Cationic, Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide should be strict for about 2 hours.
7. The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic Polyacrylamide should be strict for about 3 hours.
Contact Person: Admin
Tel: +8613598853789