|
Product Details:
|
| Product Name: | NPAM Nonionic Polyacrylamide Granules Wastewater Treatment Chemicals Flocculant | Chemical Formula: | (C3H5NO)n |
|---|---|---|---|
| Molecular Weight: | 8-12 Million | Usage: | Waste Water Treatment,Water Treatment Chimicals,Sewage Water Treatment,Coal Mine Washing,paper Sludge Dewatering |
| Water Solubility: | Watersoluble | Dissolution Time: | ≤90 Minutes |
| Remaining Monomer: | ≤0.1% | Sample: | Free Sample Provided |
| High Light: | NPAM Nonionic Polyacrylamide Granules,Wastewater Treatment NPAM Polyacrylamide Granules,NPAM Polyacrylamide Granules Chemicals Flocculant |
||
NPAM Nonionic Polyacrylamide Granules Wastewater Treatment Chemicals Flocculant
Product Description
Polyacrylamide, abbreviated as PAM, is a water-soluble high flocculant polymer, widely used in petroleum, paper, metallurgy, textile, sugar, environmental protection and other fields. Divided into anionic, cationic and non-ionic three categories.
Specification
| Product name | Polyacrylamide(PAM) |
| Basicity | ≥90 |
| Molecular weight (Million) | 10-18 |
| Degree of Hydrolysis(%) | 20-30 |
| Solid content (%) | ≥90 |
| Effective PH Value | 5-12 |
| Dissolution Time (Min) | ≤90 |
| Remaining monomer (%) | ≤0.1 |
Application Fields
Application Fields Areas
(1) Used for the dehydration of inorganic sludge, which can significantly improve production efficiency, increase the solid content of mud cake, and reduce the solid content of filtered water.
(2) Used for filtering, improving the quality of filtered water and improving the production efficiency of the filter.
(3) Used for concentration or precipitation, can improve concentration efficiency, speed up precipitation, etc.
(4) The clarification of water can effectively reduce the suspended solids and turbidity of the treated water and improve the quality of the effluent
(5) Used as an aid in some industrial processes.
Application Method:
1. Dissolution: Dissolve solid PAM into an aqueous solution of 1‰-5‰ before use. When adding, it should be slowly added to the water to ensure the dissolution of the agent
2. The dosage of the solution: the general aqueous solution is 1‰-5‰, but for the suspension with high concentration and high viscosity, it is recommended to dilute the aqueous solution to 0.1‰ for better effect (try to avoid using a high shear centrifugal pump to dissolve to prevent the molecular chain from being cut off) )
3. Compared with anionic PAM, the molecular weight of cationic PAM is lower, so the concentration ratio of cationic and nonionic PAM is higher than that of anionic PAM. The recommended concentration is 1‰-5‰.
Contact Person: Admin
Tel: +8613598853789
