|
Product Details:
|
| Product Name: | PAC Poly Aluminium Chloride CAS 1327-41-9 In China | Other Names: | Poly Aluminium Chloride, PAC |
|---|---|---|---|
| Appearance: | Yellow Powder | Type: | Wastewater Treatment Chemicals |
| Brand Name: | SAIFU | PH(1% Water Solution): | 3.5-5.0 |
| Basicity%: | 40-90 | Cas No.: | 1327-41-9 |
| High Light: | CAS Number 1327-41-9,28.9% Polyaluminium Chloride,Poly Aluminium Chloride CAS Number |
||
Wastewater Treatment Chemicals PAC Poly Aluminium Chloride CAS 1327-41-9 In China
Polyaluminum chloride (PAC) is one of the most effective water treatment chemicals in use today. Compared with other water treatment chemicals, it has higher flocculation efficiency and the widest pH and temperature application range, so it is widely used in drinking water and wastewater treatment. This efficiency makes it possible to increase plant productivity and reduce operating costs. PAC has little effect on pH, so there is little demand for pH adjustment chemicals, which further reduces operating costs. PAC is used as a retention aid in the paper industry to increase the emission rate of neutral and alkaline processes, improve sizing efficiency and reduce the need for cationic additives.
The alkalinity of polyaluminum chloride is a relatively important indicator of polyaluminum, especially for drinking water-grade polyaluminum products. The lower the base, the higher the price. In addition, the alkalinity of polyaluminum chloride products produced by different raw materials and different processes is also different, which requires manufacturers to adjust. Increasing the alkalinity of polyaluminum chloride products can greatly improve the economic benefits of production and use. The alkalinity is increased from 65% to 92%, the production raw material cost can be reduced by 20%, and the use cost can be reduced by 40%.
| Item | P2301 | P2302 | P2303 |
| Grade | wastewater treatment grade | Driking water treatment grade | Driking water treatment grade |
| Appearance | Yellow poder | Yellow powder | White powder |
| Al2O3 Content | 28.9% | 29.3% | 30% |
| Basicity% | 70-90 | 60-80 | 40-60 |
| pH(1% Water Solution) | 3.5-5.0 | 3.5-5.0 | 3.5-5.0 |
| Water insoluble matter | ≤1.0% | ≤0.5% | ≤0.1% |
PAC polyaluminum chloride has the advantages of good spray drying stability, wide water surface, fast hydrolysis, strong adsorption capacity, large alum formation, fast precipitation, low turbidity of the effluent, good dehydration performance, etc., under the same water quality. Spray drying polymerization The amount of aluminum chloride is reduced, especially in the case of poor water quality. Compared with drum drying polyaluminum chloride, the amount of spray-dried products can be reduced by half, which not only reduces the labor intensity of workers, but more importantly, reduces the cost of water production for users. In addition, spray-dried products can ensure safety, reduce water accidents, and are very safe and reliable for residents' drinking water.
Contact Person: Admin
Tel: +8613598853789
